How To Change Battery In Hyundai Elantra Key Fob. How to change a hyundai key fob battery: Most use the cr2032 type battery.
Now that you’ve replaced your hyundai key fob battery, follow these steps to program your key fob: Press the “open” or “unlock” button on your key fob until the vehicle’s light flashes. Turn the key to the acc or accessory ignition position.
Align The Key Fob Case And Close It By Pressing The Two Halves Together.
Test the new key fob battery by standing near your elantra and pressing the lock or unlock buttons until you see. To test the new battery, stand near your elantra and press the unlock or lock buttons. Make sure that the two halves of the fob are flush together at every edge.
Insert The New Battery Making Sure The Positive (+) Side Of The Battery Is Oriented The Same Way It Was On The Old Battery.
Here is all the information you need. Begin by removing the metal key by pressing and holding the metal tab or button. Closing it is as simple.
Replacing Your Hyundai Key Fob’s Battery Is Straightforward.
Turn the key to the acc or accessory ignition position. Note how the key fob battery is positioned so you can replace it correctly. Carefully lift the circuit board to expose the battery.
Every Two Years Or So, Or When The Battery Is Low, You May Need To Change The Key Fob Battery.
You will be touching a motherboard during this process, so it’s recommended that you also wear latex gloves to avoid accidental damage. Step 1 sit in the driver's seat of your hyundai vehicle. Get inside of your hyundai, and close all the doors.
Hold The “Open” Or “Unlock” Button On The Key Fob Until Your Car Lights Flashes.
Stick the key to your hyundai into the vehicle’s ignition cylinder. Hyundai i30 mk 2 smart key battery replacement. The hyundai key fob battery is perfect for anyone looking to replace their current dead or weak battery.